UIF CARD
Front Panel
The
front panel of UIF Data Card is shown in figure
below:
The
following table describes the front panel:
|
Item
|
LED
Status
|
LED Function
|
|
HEALTH
|
Green ON
Red
ON
Blinking
|
Card is working OK.
Card hardware has gone faulty.
Card’s hardware is OK but it is not
configured by main 2MB card.
|
|
Alm1
|
ON
|
CH#1 Alarm.
|
|
Test1
|
ON
|
Channel 1 is in test & diagnostics
mode.
|
|
Alm2
|
ON
|
CH#2 Alarm.
|
|
Test2
|
ON
|
Channel 2 is in test & diagnostics
mode.
|
Installation
·
Slide the card in required slot
& lock in position with the help of ejectors.
·
Configure the card and ports
using either NMS or Local
Port, if already not
configured.
·
Route the ports, if already not
routed.
No comments:
Post a Comment