VMUX-FRONT PANEL OF DATA ACQUISITION CARD (DAC)

DAC CARD    

                  Front Panel

                        The front panel of DAC Card is shown in figure below:

            The following table describes the front panel:

Item	LED Status	LED Function
HEALTH	Green ON Red    ON BLINKING	Card is working OK. Card hardware has gone faulty.  Card's hardware is OK but it is not configured by main 2mb card

 This card has 8 auxiliary input ports, 8 auxiliary output ports and 6 analog input ports.The analog ports can accept 0-5V input voltage from the various transducers.These transducers units can be used to measure various parameters like temperature, battery Voltage , ac voltage etc.
Installation

·         Slide the card in required slot & lock in position with the help of ejectors.

·         Configure the card and ports using either NMS or NMT , if already not configured.

·         Route the ports, if already not routed.