VMUX-FRONT PANEL OF EXCHANGE & MULTIPLEXER CARD (E&M)

E&M CARD                           

            (i)         Front Panel

                        The front panel of E&M Card is shown in figure below:

            The following table describes the front panel:

Item	LED Status	LED Function
HEALTH	Green ON Red    ON Blinking	Card is working OK. Card hardware has gone faulty. Card’s hardware is OK but it is not configured by main 2MB card.
Test1	ON	Channel 1 is in test & diagnostics mode
Test2	ON	Channel 2 is in test & diagnostics mode
Test3	ON	Channel 3 is in test & diagnostics mode
Test4	ON	Channel 4 is in test & diagnostics mode

           

Installation

·         Slide the card in required slot & lock in position with the help of ejectors.

·         Configure the card and ports using either NMS or NMT, if already not configured.

                      Route the ports, if already not routed