VMUX-FRONT PANEL OF G.703 DATA CARD(GDT)

G703 CARD  

                  Front Panel

                        The front panel of G703 Data Card is shown in figure below:

           

The following table describes the front panel:

Item	LED Status	LED Function
HEALTH	Green ON Red    ON Blinking	Card is working OK. Card hardware has gone faulty. Card’s hardware is OK but it is not configured by main 2MB card.
Alm1	ON	LOS or Bipolar Violation on CH#1.
Test1	ON	Channel 1 is in test & diagnostics mode.
Alm2	ON	LOS or Bipolar Violation on CH#2.
Test2	ON	Channel 2 is in test & diagnostics mode.
Alm3	ON	LOS or Bipolar Violation on CH#3.
Test3	ON	Channel 3 is in test & diagnostics mode.
Alm4	ON	LOS or Bipolar Violation on CH#4.
Test4	ON	Channel 4 is in test & diagnostics mode.

          

Installation

·         Slide the card in required slot & lock in position with the help of ejectors.

·         Configure the card and ports using either NMS or NMT , if already not configured.

·         Route the ports, if already not routed.